Loading ...
Loading ...
Loading ...
Page 10
STORE THE BIT (FIG.3)
FIG. 3
Bit Holder
Your drill/driver is equipped with a bit holder
on the heel of the tool. After using the bit,
you can insert the bit into the bit holder for
convenient storage.
INSTALL/REMOVE THE SIDE
HANDLE (FIG.4)
FIG. 4
Side Handle
1. Align the side handle with either the left
or right mounting hole in the housing of
the tool.
2. Turn the side handle clockwise to
tighten the side handle.
3. Turn the side handle counterclockwise
to loosen and remove the side handle.
OPERATION
INSTALL THE BELT
CLIP (FIG.2)
FIG. 2
1. Align the rib of the clip with the hole on
the base of the drill/driver.
2. Insert the screw and tighten the screw
securely with a screwdriver. The belt clip
can be positioned on the left side of the
tool.
REMOVE THE BELT
CLIP (FIG.2)
1. Use a screwdriver to loosen the screw
that attaches the belt clip to the drill/
driver.
2. Remove the screw and the belt clip.
Bit
Mounting Holes
Screw
Belt Clip
Loading ...
Loading ...
Loading ...