Loading ...
Loading ...
Loading ...
Page 14
INSTALL THE BIT (FIG.13)
FIG. 13
Unlock
(Release)
1. Remove the battery pack from the drill/
driver.
2. Open the chuck jaws until the opening is
slightly larger than the bit you intend to
use and raise the front of the drill/driver
slightly to keep the bit from falling out of
the chuck jaws.
3. Insert the bit into the chuck.
4. Rotate the chuck in the direction of the
arrow marked LOCK to close the chuck
jaws.
5. Tighten the chuck jaws securely on the
bit.
REMOVE THE BIT (FIG.13)
1. Remove the battery pack from the drill/
driver.
2. Open the chuck jaws.
3. Rotate the chuck in the direction of the
arrow marked UNLOCK to loosen the
chuck jaws.
4. Remove the bit.
OPERATION
IMPULSE MODE (FIG.12)
FIG. 12
1. Impulse mode creates a pulsating on-
off-on motor power cycle, which leads to
a short impulse of torque, together with
low speed, that can be more effective
than a pure rotational motion for certain
applications. The impulse mode can be
used to remove stubborn screws and
prevent the bit tip from walking when
drilling into smooth surfaces, such as
ceramic tiles and steel pipes.
2. Attach the battery to the tool.
3. Turn the direction-of-rotation selector
fully to the left or right and then press the
trigger switch to shine the LED worklight.
4. If the impulse indicator is off, you can
press the impulse button to turn on
the impulse indicator. If the impulse
indicator is on, it indicates that the
impulse mode has been turned.
WARNING:
Do not work for long
periods with the impulse mode activated
as the motor can be overheated.
NOTICE: The impulse mode has a memory
function. If the impulse mode is activated
and not turned off, you can continue to
use the mode directly next time.
NOTICE: With the impulse mode on, the
impulse indicator will be automatically turn
off about 1 minute after the trigger switch
is released.
Impulse
Indicator
Impulse
Button
Bit
Lock
(Tighten)
Keyless Chuck
Chuck Jaws
Loading ...
Loading ...
Loading ...