Loading ...
Loading ...
Loading ...
Page 9
OPERATION
LED WORKLIGHT (FIG.2)
FIG. 2
LED
Worklight
The LED worklight, located on the front of the
tool, will illuminate when the trigger switch
is depressed before the tool is running. This
provides additional light on the surface of
the workpiece. The light will automatically
turn off within 10 seconds after releasing the
trigger.
PIVOT SHOE (FIG.3)
FIG. 3
Pivot Shoe
The shoe pivots to provide maximum
contact with the surface being cut.
1. Remove the battery pack from the saw.
2. Hold the saw securely, and then pivot
the shoe to the desired angle.
VARIABLE-SPEED TRIGGER
SWITCH (FIG.4)
FIG. 4
Lock-Off Button
Your reciprocating saw is equipped with a
variable-speed trigger switch to turn the
saw on and off and to control the speed.
1. To start the saw, press the lock-off
button to the direction of “ ” (right side
of the tool) and then squeeze the trigger
switch.
2. To stop the saw, release the trigger
switch and press the lock-off button to
the direction of “
” (left side of the tool)
to lock the trigger switch in the “OFF”
position.
VARIABLE-SPEED (FIG.4)
The variable-speed trigger switch delivers
higher speed with increased trigger pressure
and lower speed with decreased trigger
pressure.
Variable-Speed
Trigger Switch
Loading ...
Loading ...
Loading ...