Simer 3305P 1/2 HP Convertible Well Pump

User Manual - Page 10

For 3305P. Also, The document are for others Simer models: 3325E, 3327E, 3307P, 3310P

PDF File Manual, 48 pages, Read Online | Download pdf file

3305P photo
Loading ...
Loading ...
Loading ...
Electrical 10
For parts or assistance, call Simer Customer Service at 1-800-468-7867
Wiring Connections
Fire hazard. Incorrect voltage can cause a fire or seriously
damage the motor and voids the warranty. The supply voltage must be
within ±10% of the motor nameplate voltage.
NOTICE: Dual-voltage motors may be set for 115V or 230V. If necessary,
reset the motor to the desired voltage, as shown. Do not alter the wiring in
single voltagemotors.
Install, ground, wire, and maintain your pump in compliance with the
National Electrical Code (NEC) or the Canadian Electrical Code (CEC), as
applicable, and with all local codes and ordinances that apply. Consult
your local building inspector for code information.
Connection Procedure:
1. Connect the ground wire first as shown in Figure 14. The ground wire
must be a solid copper wire at least as large as the power supply wires.
2. There must be a solid metal connection between the pressure switch
and the motor for motor grounding protection. If the pressure switch
is not connected to the motor, connect the green ground screw in the
switch to the green ground screw under the motor end cover. Use a
solid copper wire at least as large as the power supply wires.
3. Connect the ground wire to a grounded lead in a service panel, to a
metal underground water pipe, to a metal well casing at least ten feet
(3m) long, or to a ground electrode provided by the power company or
the hydro authority.
4. Connect the power supply wires to the pressure switch as shown in
Figure14.
You have just completed the wiring for your pump.
Please go to Page 11 for startup preparations.
Wiring Chart Recommended Wire and Fuse Sizes
Motor HP Volts
Max. Load
Amp
Branch Fuse
Rating Amp
DISTANCE IN FEET FROM MOTOR TO SUPPLY
1 - 100 101 - 200 201 - 300 301 - 400 401 - 500
AWG WIRE SIZE (mm
2
)
1/2 115/230 9.9/4.95 15/15 14/14 (2/2) 14/14 (2/2) 12/14 (3/2) 10/14 (5.5/2) 10/12 (5.5/3)
3/4 115/230 12.2/6.1 20/15 14/14 (2/2) 10/14 (5.5/2) 8/14 (7/2) 8/14 (7/2) 6/12 (9/3)
1 115/230 14.8/7.4 20/15 12/14 (3/2) 10/14 (5.5/2) 8/12 (7/3) 8/12 (7/3) 6/12 (9/3)
Loading ...
Loading ...
Loading ...