FROM
DEVICE
FROM
DEVICE
To mount your PAUX, nd a at panel and
drill a 1” (25mm) hole. Make sure to check
behind the panel for proper clearance prior
to drilling.
Once you have the hole drilled, remove the
retaining nut and insert the PAUX with cables
through the hole. Slide the retaining nut over
the cables and proceed to tighten. Plug the
RCA and USB cables into the source unit.
The panel mount USB port allows for
convenient mounting for easy access. There is
a 6 foot extension cable from the rear of the
port that connects to your hideaway black
box or source unit.
The panel mount 1/8” (3.5mm) input port
oers convenient mounting for AUX input.
There is a 6 foot extension cable with RCA’s
from the rear of the port that connects to
your hideaway black box or source unit.
MOUNTING INSTRUCTIONS
PORT TO
SOURCE UNIT
PORT TO
SOURCE UNIT
AUX INUSB
DRILL
1”
(25MM)
MOUNT
TIGHTEN
RETAINING
NUT
