Loading ...
Loading ...
Loading ...
A. Remove the securing screw from the electrical cover plate, located on the right hand side of the
appliance.
B. Add an electrical box connector and feed the supply wires through the 7/8" (22mm) knock out.
C. Separate the black, white, red and green wires that have the wire nuts on them.
D. Remove the wire nuts and secure the black wire (L1) to the black (L1) lead of the power supply.
Connect the white wire and red wire from the appliance to the white (N) wire from the power supply.
Connect the green wire to the ground wire.
E. Resecure the cover plate.
F. Locate the voltage selector switch inside the appliance and remove the 2 screws on the metal cover.
G. Ensure that the switch is switched to 120 volt position (115 is printed on the switch). Reinstall the
metal cover.
BLACK
WHITE
BLACK
WHITE
4
6
1
1
-
:
1
0
8
&
3
+
6
/
$
5
*
0
/
'
*
3
&
1
-
"
$
&
GREEN
GREEN
(L1)
(N)
(G)
WIRE NUT
RED
(L2) (L1)
(N)
(G)
120V
EN
W415-2165 / J / 04.28.2020
15
installation
Leave enough wire so that the appliance can be removed from the enclosure without disconnecting the power
supply.
note:
Loading ...
Loading ...
Loading ...