Loading ...
Loading ...
Loading ...
Fig. 1
Fig. 2
W415-2165 / J / 04.28.2020
EN
12
installation
3.3.1 appliance installation
A. Place a cloth (not supplied) onto the mantel (Fig. 1) to prevent the appliance from scratching the mantel
surface.
B. With 2 people, lift the appliance up and insert into the opening, leave space between the appliance and
fl oor base in order to not scratch the fl oor surface. Do not push or slide the bottom of the appliance on
the fl oor base (Fig. 1).
C. Set the appliance down and into place and remove the cloth (Fig. 2).
APPLIANCE
STEP 3: SET APPLIANCE
APPLIANCE
1/4"
STEP 1: LIFT
STEP 2: INSERT
DO NOT SLIDE APPLIANCE
!!
LEAVE ABOUT
A 1/4" GAP
CLOTH
3.3.2 voltage selection
This appliance is able to use 120 volt or 240 volt power supply by setting the voltage selector switch (Fig. 1) and
hard wiring confi gurations.
Fig.1
230
The factory set up confi guration is 120 volt operation with cord plug.
note:
Only a qualifi ed person can change the voltage setting.
important:
Loading ...
Loading ...
Loading ...