Loading ...
Loading ...
Loading ...
66
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
7.1.4 Channel System + ZONE SPEAKER (For North American models only)
MAIN ROOM
2
9bk
blbm
87
5
4
6
3
1
ZONE 2
bo bn
Power amplier
MAIN ROOM:
This is an example of combining the top middle speakers at the
front and the rear high speakers at the rear to the 7.1 Channel System. The height
speakers in front can be selected from following 4 types. The height speakers that can
be combined at the rear dier depending on the height speakers used at the front.
❏
Combination example when Top Front Speakers are used at the front
( p39)
❏
Combination example when Top Middle Speakers are used at the front
( p41)
❏
Combination example when Front High Speakers are used at the front
( p42)
❏
Combination example when Dolby Enabled Speakers (Front) are used at the front
( p45)
ZONE 2: You can enjoy 2-ch audio in the separate room (ZONE 2) while
performing playback in the main room (where this unit is located). The same
source can be played back in the main room and ZONE 2 simultaneously. Also,
dierent sources can be played back in both rooms.
• While ZONE 2 playback is being performed, Height 1 speakers installed in the
main room cannot play audio.
"Speaker Setup" settings during Initial Setup ( p183)
Speaker Setup
7.1.4 ch
Height 1 Speaker
Height 2 Speaker
Speaker Impedance 6 ohms or above
Zone 2 Preout
Zone 2
Top Middle
Rear High
Zone 2
• Speaker Channels: 7.1.4 ch
• Subwoofer: Yes
• Height 1 Speaker: Select the type of
height speaker actually installed.
• Height 2 Speaker: Select the type of
height speaker actually installed.
• Zone Speaker: Zone 2
• Zone 2 Preout: Zone 2
• Bi-Amp: No
•
Speaker Impedance: Set any value ( p47)
Setup
To output the video and audio of the HDMI input to ZONE 2, from
the Home screen, set "System Setup" - "Input/Output Assign" - "TV
Out/OSD" - "Zone 2 HDMI" ( p146) to "Use".
Loading ...
Loading ...
Loading ...