Loading ...
Loading ...
Loading ...
161
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Setting Item Default Value Setting Details
USB Power Out
at Standby
O When this function is set to "On", power can be
supplied to devices connected to the USB port on
the rear panel even when the unit is in the standby
mode. Supply of power to USB devices in the
standby mode is not supported for the USB port on
the front panel.
• When this function is set to "On", the power
consumption in standby state increases,
however, the increase in power consumption is
minimized by automatically entering the HYBRID
STANDBY mode where only the essential circuits
operate.
Network Standby On When this function is set to "On", the network
function works even in standby state, and you can
turn on the power of the unit via network using an
application such as Pioneer Remote App that can
control this unit.
• When this function is set to "On", the power
consumption in standby state increases,
however, the increase in power consumption is
minimized by automatically entering the HYBRID
STANDBY mode where only the essential circuits
operate. Note that even if this function is set to
"O", when any of the HDMI CEC ( p159),
HDMI Standby Through ( p159), USB Power
Out at Standby ( p161) and Bluetooth
Wakeup ( p161) functions is enabled, this
function will be in "On" state regardless of the
setting.
• When connection to the network is lost, "Network
Standby" may be disabled to reduce power
consumption. In such a case, turn the unit on by
using the power button on the remote controller
or main unit.
Setting Item Default Value Setting Details
Bluetooth Wakeup O
This function wakes up the unit on standby by
connecting a BLUETOOTH-enabled device.
"On": When this function is used
"O": When this function is not used
• When this function is set to "On", the power
consumption in standby state increases,
however, the increase in power consumption
is minimized by automatically entering the
HYBRID STANDBY mode where only the
essential circuits operate.
• This setting is xed to "O" if "Network/
Bluetooth" - "Bluetooth" - "Auto Input Change" is
set to "O".
• Wait for a while if "Network Standby" and "Bluetooth Wakeup" cannot be selected. It can
be selected when the network function is activated.
Loading ...
Loading ...
Loading ...