User Manual - Page 195

equipped with an HDMI jack, use a digital coaxial cable, digital optical cable or analog audio cable. Also, the audio from externally connected AV

components can be output to ZONE 2 only when the audio is analog or 2ch PCM signal. When the AV component is connected to this unit with an

HDMI cable, digital coaxial cable or digital optical cable, change the audio output of the AV component to the PCM output.

the System Setup menu.

• To output audio from an externally connected AV component to ZONE 3, use an analog audio cable for connection. Also, audio from externally

connected AV components can be output to ZONE 3 only when it is an analog audio signal.

• Make sure that the sensor of the main unit is not subjected to direct sunlight or inverter-type uorescent lights. Relocate it if necessary.

• If the main unit is installed in a rack or cabinet with colored-glass doors, or if the doors are closed, the remote controller may not work normally.

• When the Dimmer function is working, the display may go dim or turn o󰀨. Press the DIMMER button, and change the brightness level of the

display.

• If you have connected another device to the same outlet as this unit, strange noise may occur under the inuence of the device. If the symptom is

remedied by removing the power plug of the other device from the outlet, use di󰀨erent outlets for this unit and the device.