Loading ...
Loading ...
Loading ...
Installation
English 31
*
A
CAUTION
• Connect the hose guide (A) within
7.6–12.7 cm (*) from the end of the
drain hose. If the drain hose is extended
beyond the end of the hose guide, mold
or microorganisms could spread inside
the washer.
• The drain hose can be installed up to
245 cm high, but the draining capability
can be reduced at the maximum height.
Water remaining in the drain system
may cause an odor.
• If the drain hose is installed less than
46 cm high, water can be drained
during the process due to a siphon
phenomenon. If this happens, a ‘4C’
information code appears on the
display.
NOTE
To position using the pipe connector
You washer comes with a pipe connector
that is designed to join the upper drain
hose and the lower drain hose. You can
choose to use the connector to combine
two drain hoses into a single outlet.
1. Insert the clamp ring on the end of the
drain hose, one for each drain hose.
A
2. Insert the pipe connector into the drain
hoses. Make sure the longer side (A) ts
into the drain hose running from the
lower washer.
3. Fix the position of the clamp rings near
the end of each hose.
• To remove the pipe connector, follow
these steps above in the reverse order.
FlexWash(COMBO)_DC68-03768S-00_EN.indd 31 2017-10-12 6:39:09
Loading ...
Loading ...
Loading ...