Loading ...
Loading ...
Loading ...
Installation
Installation
English28
The pipe connector can be positioned in the following ways:
A
B
Over the edge of a wash basin
The pipe connector (B) must be placed at a
height of between 60 cm and 90 cm from
the oor. To keep the spout of the drain
hose bent, use the supplied plastic hose
guide (A). Secure the guide to the wall
using a hook to ensure stable drainage.
NOTE
B : Pipe Connector
A
F
D
G
E
B C
ln a standpipe or laundry tub
The laundry tub (B) or standpipe (C) must
be no shorter than 46 cm and no higher
or longer than 245 cm. Make sure the
pipe connector and the standpipe are
not airtight. The height of the standpipe
(E) must be 1100 mm or higher from the
oor.
NOTE
A: Hose guide / D: Tie straps / F : Pipe
Connector / G: 85 mm
CAUTION
• Do not extend the (Y-shaped) pipe
connector using an extension hose.
• Make sure you face the tip of the pipe
connector downwards to the drain hole.
Positioning the connector tip elsewhere
can cause the drained water to ow
backward.
FlexWash(COMBO)_DC68-03768S-00_EN.indd 28 2017-10-12 6:39:08
Loading ...
Loading ...
Loading ...