Loading ...
Loading ...
Loading ...
19
2
3
1
B
A
6,5 () 6,5 ()
20 ()
20 ()
22 ()
22 ()
22 () 22 ()
Installation Guide
Appliance Wall
or
furniture
Wall
or
furniture
Installation
For a built-in installation, to close gaps between the appliance and
the adjacent cabinets, special side proles and aluminum covering
frames are provided.
Operate as follows:
Push the appliance into the installation niche
1
.
If the unit is to be installed inside a niche or within an enclosed
structure, it is necessary to design a ventilation shaft at the back of
the niche to assure proper ventilation at the back of the unit. A 5 mm
gap is sufcient to prevent overheating. Always mount front panels on
door and drawer before pushing the unit into its nal position inside the
niche or structure.
Secure the appliance to the adjacent cabinets by xing to these the
side proles previously mounted on the appliance
2
.
To make this operation easier keep the door and the drawer open.
Check the levelling of the appliance, adjusting its feet and wheels
to correct it.
Mount the proles the covering frames: rst insert them laterally and
then push rmly until a “click” is heard
3
.
A Connecting element B Alluminium frame
Built-in installation single appliance
Side proles mounting
Series: Integrated
Loading ...
Loading ...
Loading ...