Loading ...
Loading ...
Loading ...
11
11.1
11.3
11.2
20
Care and Cleaning
Care and Cleaning
Internal cleaning
To clean the parts in steel use a microfiber cloth and the sponge pro-
vided in the kit with the appliance.
Always use the cloth and sponge in the direction of the steel’s satin nish.
Every now and then, to make to steel shiny, wipe with a slightly damp
microfiber cloth.
Do not use the sponge on aluminium parts, such as the handles and
the profiles of the glass shelves.
You should use special care to keep free of obstructions the ventila-
tion openings in the appliance or in the cabinet that houses it.
Scrupulously follow the detailed directions that
can be found in the provided kit and never
use abrasive or metallic products which could
scratch and damage the satin nishing on the
appliance permanently.
Before performing any sort of cleaning, discon-
nect the appliance from the electrical power
supply. Make sure you do not damage the re-
frigerant circuit in any way.
Do not bring cold glass parts into contact with
boiling water.
Do not wash any parts of the refrigerator in a
dishwashing machine since this could damage
or irreparably deform the parts.
Clean the internal and removable parts by washing them with a so-
lution of lukewarm water, a small amount of dishwashing detergent
and a pinch of baking soda.
Rinse and dry right away.
Do not use mechanical devices or other methods to speed up de-
frosting.
Do not use water on the electrical parts, lights
and control panel.
Condenser cleaning
The edges of the condenser are sharp, there-
fore use adequate protection for the hands and
arms when cleaning the condenser.
A ventilation grille is located either at the top of the appliance or at the
bottom according to the model type.
A foam lter is placed behind the grille to protect from dust the ventila-
tion system.
To clean it use a vacuum cleaner with a soft brush attachment at maxi-
mum power, sweeping it along the vent slits. In case of a signicant dust
build up, the ventilation grille can be removed to allow a more accu-
rate cleaning of the lter.
Take care also to check the condition of the nned condenser and
clean it from dust if needed.
Operate as follows:
Switch off the appliance by pressing the Unit button on the main
control panel for approx 3 seconds.
On models with ventilation at the base remove the grille at the bottom
and take it off. On models with ventilation at the top the grille (mag-
netically attached) lift as shown in the picture.
Thoroughly clean the grille and the foam lter, by means of a vacuum
cleaner and the soft brush attachment.
Wait approx 30 minutes, until the nned condenser cools down to
room temperature, then clean it thoroughly from any dust build up as
shown in the picture, taking care not to damage it.
Start up the appliance again, by pressing the Unit button on the
main control panel for approx 3 seconds.
Loading ...
Loading ...
Loading ...