SBC 22 User Manual

Loading ...

Electromagnetic Compatibility Information

Table 1

For all ME EQUIPMENT and ME SYSTEMS

Guidance and manufacture’s declaration – electromagnetic emissions

The SBC29 is intended for use in the electromagnetic environment specified below. The customer of the user of the SBC29 should assure that it is

used in such and environment.

Emission test Compliance Electromagnetic environment – guidance

RF emissions CISPR 11 Group 1

The

SBC29

uses RF energy only for its internal function. Therefore, its RF emissions are very

low and are not likely to cause any interference in nearby electronic equipment.

RF emission CISPR 11 Class B The

SBC29

is suitable for use in all establishments, including domestic establishments and

those directly connected to the public low-voltage power supply network that supplies buil

dings used for domestic purposes.

Table 2

For all ME EQUIPMENT and ME SYSTEMS

Guidance and manufacturer’s declaration – electromagnetic immunity

The SBC29 is intended for use in the electromagnetic environment specified below. The customer or the user of SBC29 should assure that it is used

in such an environment.

Immunity test IEC 60601 test level Compliance level Electromagnetic environment - guidance

Electrostatic discharge (ESD)

IEC 61000-4-2

± 6 kV contact

± 8 kV air

± 6 kV contact

± 8 kV air

Floors should be wood, concrete or ceramic

tile. If floor are covered with synthetic material,

the relative humidity should be at least 30%.

Power frequency (50Hz) magne-

tic field

IEC 61000-4-8

3 A/m 3 A/m Power frequency magnetic fields should be at

levels characteristic of a typical location in a

typical commercial or hospital environment.

Loading ...

User Manual - Page 65