Loading ...
Loading ...
Loading ...
GB
9
• Accessories supplied do not meet water-proof, dust-proof, and shock-proof
specifications.
Notes before using the camera under/near water
• Make sure that no foreign matter such as sand, hair, or dirt gets inside the
battery cover or memory card/connector cover. Even a small amount of
foreign matter may lead to water entering the camera.
• Confirm that the sealing gasket
and its mating surfaces have not
become scratched. Even a small
scratch may lead to water
entering the camera. If the
sealing gasket or its mating
surfaces become scratched, take
the camera to an authorized
repair shop to have the sealing
gasket replaced for a fee.
• If dirt or sand gets on the sealing
gasket or its mating surfaces,
wipe the area clean with a soft
cloth that will not leave behind
any fibers. Prevent the sealing gasket from becoming scratched by touching
it while charging a battery or using a cable.
• Do not open/close the battery cover or memory card/connector cover with
wet or sandy hands or near water. There is a risk this will lead to sand or
water getting inside. Before opening the cover, perform the procedure
described in “Cleaning after using the camera under/near water.”
• Open the battery cover or memory card/connector cover with the camera
completely dry.
• Always confirm that the battery cover or memory card/connector cover has
been securely locked.
Notes on using the camera under/near water
• Do not subject the camera to shock such as from jumping into water.
• Do not open and close the battery cover or memory card/connector cover
while under/near water.
• This camera sinks in water. When using, place your hand through a strap,
etc. to prevent the camera from sinking.
• The water-proof/dust-proof performance is not ensured when the battery
cover or memory card/connector cover is open.
1 Sealing gasket
2 Surface contacting the
sealing gasket
Loading ...
Loading ...
Loading ...