Loading ...
Loading ...
Loading ...
EN 18
OPERATION
B Switch-off function timer
The switch-off timer facilitates the cooking process by allowing you
to set the cooking time for a particular cooking zone. In order to set
the switch-off timer, the power level must already have been set
(see section “Turning on the cooking zones”).
• Press the timer sensor key (D) to activate the timer. “00” is
displayed on the timer display (L) and the decimal point (F1)
is lit. When the (D) sensor key is pressed again, the (K) point
indicating the selected cooking zone, starts flashing.
• As long as the decimal point is lit, sensor keys “+” (G) and
“–” (I) can be used to set the time in the range from 1 to 99
minutes. IF the sensor key is pressed and held, the rate at
which the timer setting is changing will be increased after a
while.
• When the value was set, the countdown starts. The
corresponding point (K) is still flashing, indicating the selected
cooking field.
Cooking time can be set for each cooking zone independently.
If several timers have been programmed, the time that is closest to
zero will always be displayed. This is indicated by a flashing signal
light (L) which indicates the cooking field.
Changing the timer setting
• Timer setting can be changed any time during operation.
• Press the timer sensor key (D) to display the remaining time for
the selected cooking field. The corresponding signal light (K)
will flash.
• Press the “+” (G) or “–” (I) sensor key to set the new cooking
time.
Checking the remaining cooking time
• If several timers are set, the remaining cooking time can be
displayed by touching the (D) sensor key.
J DF
F1
I H G
LK
E
Loading ...
Loading ...
Loading ...