Loading ...
Loading ...
Loading ...
EN 14
OPERATION
Activating the child lock
• Activate the child lock by holding the (B) sensor key for
approximately three seconds; the (B1) signal light will light up.
• Child lock can be activated when the cooking zone is operating.
• Child lock prevents activation of any sensor key, except for the
main switch (A) and the child lock sensor key (B).
Deactivating the child lock
• Child lock can be deactivated, or disengaged, by holding the
(B) sensor key for three seconds. A beep will sound when the
lock is disengaged and the signal light above the sensor key
will go off.
Residual heat indicators
As soon as a hot coking zone is switched off, or when the entire
cooking hob is turned off, the following is displayed on the display
of each hot cooking zone:
• “H” if the cooking zone is still hot;
• “h” if the cooking zone is cooling down and is warm to touch.
The duration of this display is calculated given the power level and
depends on how long the cooking zone has been activated. When
the “H” or “h” sign goes off, the cooking zone may in some cases
(power failure, a hot pan left on the cooking zone) still be hot. Be
careful, as there is a risk of burning.
If a power failure has occurred when the cooking zones were
hot, the indicator “H” or “h” will flash. This is to warn you
that the cooking zone may still be hot, but not necessarily,
depending on how long the power supply was out of order. The
hob can be used normally. ‘H’ will disappear after 35 minutes.
Automatic cook function
When this function is activated, the cooking zone will operate at the
highest possible level for a certain period of time, depending on the
selected power level; after this, the cooking zone will automatically
switch to the initially selected level and continue operating.
The autocook function may be activated for each cooking zone,
for any power level, except for power level “9”, as in this case the
cooking zone is constantly operating at full power.
C1 B1
C B A
Loading ...
Loading ...
Loading ...