Loading ...
Loading ...
Loading ...
EN 12
General
• The cooking hob is fitted with electronic sensor keys which
are activated, respectively, when the indicated surface of
a particular sensor is touched with a finger for at least one
second.
• Activation of a sensor key is confirmed by a beep.
• Do not place any objects on the sensor key surface (this may
• trigger error reports).
• Make sure the sensor key surface is always clean.
Turning on the cooking hob
• Touch the on/off sensor key (A) and hold it for at least one
second. The cooking hob is activated; a “0” is displayed next to
all power level displays (F), and a decimal point (F1) is flashing.
Any subsequent setting must be carried out within the following 10
seconds; otherwise, the cooking hob will be automatically switched
off again.
Turning on the cooking zones
• If the cooking hob was turned on with the on/off sensor key (A),
the desired cooking zone may be activated in the following 10
seconds. To do this, touch the (H) sensor key. A decimal point
(F1) will light up next to the power level display of the currently
selected cooking zone.
• Touch the “+” sensor key (G) to set the power level 1-9. If the
key “–” (I) is touched first, the setting 9 is selected immediately.
When the “+” (G) or “–” (I) sensor key are pressed and held, the
levels will automatically start decreasing or increasing. Power level
can also be changed by touching these two sensor keys several
times; in this case, the power level is changed stepwise.
Settings can only be made for one selected cooking zone at a time
– the one indicated by the decimal point (F1).
• If all power levels are set to “0”, the cooking hob will be turned
off automatically after 10 seconds.
OPERATION
C1 B1
C B A
J DF
F1
I H G
LK
E
Loading ...
Loading ...
Loading ...