Loading ...
Loading ...
Loading ...
8
Operating your radio
Your radio is equipped with three tuning methods- Scan tuning, manual tuning and memory preset
tuning.
Scan tuning FM / AM
1. Make sure you have set up the FM antenna in advance .
2. Press the On/Off button to switch on your radio.
3. Press the Source button repeatedly to select the desired wave band.
4. Press the Tuning control rotary. Your radio will scan in an upwards direction (low frequency to high
frequency) and stop automatically when it nds a station of sufcient strength.
5. After a few seconds the display will update. The display will show the frequency of the signal
found. If the signal is strong enough and there is RDS/RBDS data present then the radio will
display the station name.
6. To nd other stations, press the Tuning control rotary as before.
7. When the waveband end is reached your radio will recommence tuning from the opposite
waveband end.
8. Adjust the Volume buttons to the required setting.
9. To switch off your radio press the On/Off button.
Manual tuning – FM / AM
1. Press the On/Off button to switch on your clock radio.
2. Press the Source button repeatedly to select the desired wave band.
3. Rotate the Tuning control rotary to tune to a station. The frequency will change in steps of 50kHz/100
kHz in FM or 9 kHz/10 kHz in AM.
4. When the waveband end is reached the radio will recommence tuning from the opposite
waveband end.
5. Adjust the Volume buttons to the desired settings.
6. To switch off your clock radio press the On/Off button.
Setting up the tuning step increment
1. Press and hold the Info/menu button to enter the menu setting when the radio source is in AM/
FM mode.
2. Rotate the Tuning control rotary button until FM xxK or AM xxkHz shown on the display, and press
the Tuning control rotary to enter the step increment setting.
3. Rotate the Tuning control rotary button to select 50kHz/100kHz for FM radio, and 9kHz/10kHz
for AM radio. Then press the Tuning control rotary to conrm the setting.
Loading ...
Loading ...
Loading ...