Loading ...
Loading ...
Loading ...
7
GB
Power your radio
AC operation
Before plugging the AC cord into the radio, make sure the AC voltage is correct. Insert the plug on
the end of the supplied power cord into the AC power socket on the back of the radio.
DC operation
For outdoor use, you can power the radio by using 12v DC input socket from a DC power supply
(example, from the power supply of vehicles or boats). An AC power adaptor with 1 Ampere and
center positive in polarity can also power the radio in house.
Antenna setup for FM reception
The radio comes with built-in AM/FM antenna and external antenna.
To use FM internal antenna, make sure to switch FM external/internal antenna switch in the back
of your radio to internal antenna position (i.e. INT. FM ANTENNA). As for external antenna, there
are two types of antenna can be used to improve FM reception. You can connect the supplied FM
antenna to the F-type antenna terminal and adjust the wire for best reception. You can also connect
a 75 ohm coaxial cable of outdoor antenna to the terminal.
Make sure to switch external/internal antenna switch to external position while connecting the
outdoor/rooftop antenna.
Note:
In some of the European countries, you may have to use adaptor plug to connect with the outdoor/
rooftop antenna in case your antenna has an incorrect type of plug.
Antenna setup for AM reception
The radio comes with built-in AM Ferrite antenna which should be enough for normal listening. To
improve the AM reception, you may connect the outdoor AM antenna (not supplied) with AM external
antenna terminal.
Loading ...
Loading ...
Loading ...