Loading ...
Loading ...
Loading ...
14
Playback MP3 or WMA Files from USB
This section describes how to use your radio to access and playback your audio files via USB
memory devices. USB slots are located on the front panel of the unit. Important: Your radio is only
designed to work with USB memory ash memory devices. It is not intended to be connected to hard
disk drives or any other type of USB device.
It is possible to use SD or SDHC cards for media playback when held in a suitable USB adaptor.
However, due to the wide variation of such adaptors, it is not possible to guarantee that all adaptor /
card combinations will work with the radio.
The unit has been tested with a range of USB memory devices of up to 32GB capacity. It supports
USB 2.0 full-speed and USB 3.0. (Note: when using USB 3.0, at the beginning it will show ‘No
device’ on the display, please allow the unit to detect the device for a longer period of time.) USB
memory must use the FAT or FAT 32 ling system in order to operate with the sound system, it does
not support NTFS.
Audio formats supported for playback are MP3 and WMA. Playback does not support les encoded
using WMA lossless, WMA Voice, WMA 10 professional, nor les of any format which have DRM
protection.
Cautions:
In order to minimize the risk of damage to your radio, your USB Memory, please place the unit such
that the device cannot easily be knocked while it is inserted in the socket.
Remove the USB before carrying the unit or if not using the USB feature for a prolonged period.
Place the unit in Standby mode removing your USB memory device.
The USB connection is intended only for ash memory devices.
The use of hard disk storage media is not supported.
Play back via USB les stored on MP3 players is not guarantee.
Playing MP3 and WMA les in USB
1. When USB is inserted, press the On/Off button to turn the radio on and then press Source button
to select USB. The LCD display will show “reading“and the number of les and folders stored
in
the USB will appear momentarily. However, under some circumstances,
some error messages may
appear. If the display shows ‘Unkown’ indicating your radio does not support the filing system
of the inserted USB; whereas it shows ‘No music’ indicating there are no suitable MP3/ WMA
les for playback.
2. Press the Play/Pause button to start playing from the USB. The display will show track number
momentarily, e.g. ‘TRACK 25 ’.
3. To pause playing, press the Play/Pause button. To resume playing, press the Play/Pause
button again.
4. Press the Info button repeatedly to view the information related to the specific media files.
(Note: This function only supports English letters, if the media files contain symbols other
than English letters, the symbols will be blank.)
Loading ...
Loading ...
Loading ...