Brother HL-5280DW User Manual

Loading ...

7. Troubleshooting

Error message printout

The printer can also report problems by printing an error message. Use the table below to identify and clear

the error message. The default setting for the the error message printout is off. If you want to turn the error

message printout on, from the Advanced tab of the Windows printer driver click the Device Options icon,

and then choose Error Message Printout.

Error message Action

MEMORY FULL  Press Go to print the remaining data in the printer memory. Cancel the print job

if you want to delete the remaining data in the printer memory. See Buttons on

page 48.

 Reduce the complexity of your document or cut the print resolution.

 Add more memory. See Installing extra memory on page 71.

PRINT OVERRUN  Press Go to print the remaining data in the printer memory. Cancel the print job

if you want to delete the remaining data in the printer memory. See Buttons on

page 48.

 If this does not clear the error, reduce the complexity of your document or cut the

print resolution.

 Add more memory. See Installing extra memory on page 71.

 Set page protection to AUTO by using the supplied Windows

driver or the

control panel.

 Change the following settings in the supplied Windows

driver and try again. The

best combination of these settings will vary depending on your document:

•Graphics mode

• TrueType mode

• Use Printer TrueType

Fonts

RESOLUTION REDUCED TO

ENABLE PRINTING

(The printer has printed the

document at a reduced

resolution)

 Reduce the complexity of your document before you print to prevent automatic

reduction in the resolution.

Loading ...

Brother HL-5280DW Laser Printer