Loading ...
Loading ...
Loading ...
85
uuIndicatorsuDriver Information Interface Warning and Information Messages
Continued
Instrument Panel
Message Condition Explanation
●
Appears when you close the door with the power mode
in ON without the keyless access remote inside the
vehicle.
●
Disappears when you bring the keyless access remote
back inside the vehicle and close the door.
2 Keyless Access Remote Reminder P. 129
●
Appears when the keyless access remote battery
becomes weak.
●
Replace the battery as soon as possible.
2 Replacing the Button Battery P. 416
●
Appears if the keyless access remote battery is too weak
to turn on the power system or the key is not within
operating range to turn on the power system.
A beeper sounds six times.
●
Bring the keyless access remote in front of the ENGINE
START/STOP button to be touched with.
2 If the Keyless Access Remote Battery is Weak P. 444
●
Appears three seconds after you bring the keyless
access remote in front of the ENGINE START/STOP
button when To Start, Hold Remote Near Start
Button appears. To Start Engine: Brake + Push
appears sequentially.
●
Unless you bring the keyless access remote in front of
the ENGINE START/STOP button, this message does
not appear.
2 If the Keyless Access Remote Battery is Weak P. 444
●
Appears when you set the power mode to ACCESSORY
or ON.
2 Turning on the Power P. 319
●
Appears if you press the ENGINE START/STOP button
while the vehicle is moving.
●
The message will disappear after six seconds or when
the power mode is set to VEHICLE OFF.
19 NSX-31T6N6200.book 85 ページ 2018年8月9日 木曜日 午前11時12分
Loading ...
Loading ...
Loading ...