Loading ...
Loading ...
Loading ...
338
uuWhen DrivinguLaunch Control
Driving
Launch Control
Your vehicle controls the engine and transmission response to maximize
acceleration from standstill.
1. Use the Integrated Dynamics System mode
switch to set the Integrated Dynamics
System mode to TRACK.
2 Integrated Dynamics System P. 333
2. Depress the brake pedal firmly and change
the gear position to .
3. Release the parking brake.
1Launch Control
Do not use this system when driving on wet or
slippery surfaces as you may lose control of the
vehicle.
The system puts a tremendous load on the engine
and transmission. Frequent use of this system may
lead to reduced vehicle life.
The system does not function when:
• VSA® is off.
• The vehicle is not at standstill.
• The gear position is not in .
• A gear other than 1st gear is selected when the
system is in manual mode.
• The parking brake is applied.
• The vehicle is facing uphill or downhill on a steep
slope.
• The transmission temperature is too cold or too
hot.
• There is a problem with a vehicle system.
3
WARNING
Using this system on public roads that are
used by other vehicles and pedestrians can
result in a collision involving serious injury
or death.
D/M
D/M
19 NSX-31T6N6200.book 338 ページ ２０１８年８月９日 木曜日 午前１１時１２分
Loading ...
Loading ...
Loading ...