Loading ...
Loading ...
Loading ...
Continued
123
uuSecurity SystemuSecurity System Alarm
Controls
■ Setting the security system alarm
The security system alarm automatically sets when the following conditions have
been met:
• The power mode is set to VEHICLE OFF.
• The hood and hatch are closed.
• Both doors are locked from outside with the key, remote transmitter or keyless
access system.
■ When the security system alarm sets
The security system indicator in the instrument panel blinks. When the blinking
interval changes after about 15 seconds, the security system is set.
■ To cancel the security system alarm
The security system is canceled when the vehicle is unlocked using the remote
transmitter, keyless access system, or the power mode is set to ON. The security
system indicator goes off at the same time.
1Security System Alarm
Do not set the security system alarm when someone
is in the vehicle or a window is open. The system can
accidentally activate when:
• The door is unlocked with the lock tab.
• The hatch is opened with the hatch release button
on the driver’s door or with the emergency hatch
opener.
• The gear position is shifted out of (P.
• The hood is opened with the hood release.
If the 12-volt battery goes dead after you have set the
security system alarm, the security alarm may go off
once the 12-volt battery is recharged or replaced.
If this occurs, deactivate the security system alarm by
unlocking a door using the remote transmitter or
keyless access system.
Do not alter the system or add other devices to it.
Doing so may damage the system and make your
vehicle inoperable.
Do not open the hatch with the key unless it is an
emergency.
Opening the hatch with the key will trigger the
security system.
2 When You Cannot Open the Hatch P. 462
19 NSX-31T6N6200.book 123 ページ ２０１８年８月９日 木曜日 午前１１時１２分
Loading ...
Loading ...
Loading ...