Loading ...
Loading ...
Loading ...
Continued
63
uuChild SafetyuSafety of Infants and Small Children
Safe Driving
1. Move the passenger seat to the rearmost
position.
2. Place the child seat on the passenger seat.
3. Route the seat belt through the child seat
according to the seat manufacturer’s
instructions, and insert the latch plate into
the buckle.
u Insert the latch plate fully until it clicks.
4. Slowly pull the shoulder part of the belt all
the way out until it stops. This activates the
lockable retractor.
5. Let the seat belt completely wind up into
the retractor, then try to pull it out to make
sure the retractor is locked.
u If you are able to pull the shoulder belt
out, the lockable retractor is not
activated. Pull the seat belt all the way
out, and repeat steps 3 – 5.
6. Grab the shoulder part of the seat belt near
the buckle, and pull up to remove any slack
from the lap part of the belt.
u When doing this, place your weight on
the child seat and push it into the vehicle
seat.
■
Installing a Child Seat
1Installing a Child Seat
A child seat must be secured to the vehicle with the
lap part of a lap/shoulder belt.
For your child’s safety, when using a child seat
installed using the vehicle’s seat belt system, check
that the seat is properly secured to the vehicle.
19 NSX-31T6N6200.book 63 ページ ２０１８年８月９日 木曜日 午前１１時１２分
Loading ...
Loading ...
Loading ...