Loading ...
Loading ...
Loading ...
47
ENG
English
Using CLOUD Solution
OSD Screen-Saver Timeout
Configure the number of seconds to wait after
a period of inactivity(i.e., no keyboard or mouse
action) before the client puts its attached displays
into low power mode.
Valid values are 10 to 9999, or use 0 to disable the
feature.
<Figure 2-33: Power Configuration>
<Figure 2-34: Display Configuration>
Display Tab
The Display tab allows the user to configure the
EDID function of the monitor.
The Enable display override function can be
used when the EDID function of the monitor
is not running.
NOTE
Display Suspend Timeout
Configure the number of seconds to wait after
a period of inactivity(i.e., no keyboard or mouse
action) before the client puts its attached displays
into low power mode.
Valid values are 10 to 14400 seconds, or use 0 to
disable the feature.
This timeout only applies when the device is
not in session.
NOTE
This timeout only applies when the device is
in session.
NOTE
Enable Attached Display Override
This option is intended for legacy systems. It con-
figures the client to send default EDID information
to the host when a monitor cannot be detected or
is not attached to the client.
Enable Preferred Resolution Override
Enable this option when a display is attached but
cannot be detected by the system, and you want to
specify a preferred resolution for the display.
Enable Display Cloning
This option is only available for the TERA2321
zero client. Enable the display cloning option if you
want the secondary display to mirror the primary
display.
Power Tab
The Power Tab allows the user to configure time-
out and power settings for the client.
Loading ...
Loading ...
Loading ...