Loading ...
Loading ...
Loading ...
32
ENG
English
Using CLOUD Solution
<Figure 2-8: IPv6 Configuration>
IPv6 Tab
The IPv6 tab is used when the portal is connected
to the network configured with the IP v6.
Enable IPv6
If you select Enable IPv6, the portal in use can be
connected to the network configured with the IPv6.
Link Local Address
The Link Local Address field is automatically filled
with the IP address of a device.
Gateway
The Gateway field contains the gateway IP ad-
dress of the device. Enter the gateway address to
be used by a device.
Enable DHCPv6
To assign the Dynamic Host Configuration Protocol
version 6 (DHCPv6) of a device select the Enable
DHCPv6 field.
Primary DNS Server
The Primary DNS Server field contains the pri-
mary DNS IP address of the device. This field is
optional. If DHCPv6 is enabled, this field cannot be
edited.
Identity
Enter the identity string used to identify your device
to the network.
Client Certificate
Click Choose to select the client certificate you
want to use for your 802.1x devices.
The list of certificates that appears includes the
certificate uploaded from the Certificate Upload
page that contain a private key.
If another network device (for example, a switch) is
configured to operate under 10 Mbps Full-Duplex,
100Mbps Full-Duplex or 1GbpsFull-Duplex, the
administrator should always set the Ethernet Mode
field to Auto; and if the device is to operate under
only one speed out of multiple settings, select ei-
ther 10 Mbps Full-Duplex or 100 Mbps Full-Duplex.
Loading ...
Loading ...
Loading ...