Loading ...
Loading ...
Loading ...
36
ENG
English
Using CLOUD Solution
Wake Host from Low Power State
Select whether to use the host’s MAC address or
IP address when configuring the Wake-On-LAN
feature for a client. This feature wakes up the host
when the user presses the client’s remote PC
button or clicks the connect button on the connect
window.
Host Wake MAC Address
Enter the host’s MAC address to complete the host
wake up configuration when Wake-On-LAN En-
abled + Peer Address or Wake-On-LAN Enabled +
Custom Address is selected. This client will send
a “Magic packet” to this MAC address to wake the
host computer from a low power state.
Host Wake IP Address
Enter the host’s IP address to complete the host
wake up configuration when Wake-On-LAN En-
abled + Custom Address is selected. This client will
send a “Magic packet” to this IP address to wake
the host computer from a low power state.
<Figure 2-15: Advanced Settings for Direct to
Host>
Direct to Host
You can view the screen of the host PC by estab-
lishing 1:1 connection between the PCI host card
connected to the host PC through the entered IP
address of the host PC and the portal.
DNS Name or IP Address
Enter the DNS name or IP address of the host PC.
<Figure 2-14: Direct to Host Setting>
See below for information how to set for each op-
tion.
Loading ...
Loading ...
Loading ...