Loading ...
Loading ...
Loading ...
Roast
91
You can also delay the start of the
cooking program to a later time. To do
this, select the Start at option from the
menu. In automatic programs, select
Start Later.
You can estimate approximately when
the food will be ready as the duration of
the cooking program is about the same
as if you were cooking food without
using the roast probe.
Duration and Ready at cannot be set
because the total time depends on how
long it takes for the core temperature to
be reached.
Time-left display
If the temperature set for a cooking
process is above 285°F (140°C), the
estimated duration remaining (time left)
will appear in the display.
The time left is calculated from the
cooking temperature selected, the set
core temperature, and the progress of
the core temperature as it rises.
The time left first shown is an estimate.
As the cooking process continues, the
time left is revised continuously, and a
more accurate figure is shown.
The time left will be deleted if the
cooking or core temperature is changed
or if a different mode is selected. If the
door is opened for a longer time, the
time left will be recalculated.
Displaying the core temperature
As soon as the time left appears, you
can also display the actual core
temperature.
Select Change.
Select Display core temperature.
Select On.
Confirm with OK.
The actual core temperature will also
appear in the display.
Residual heat utilization
The oven heating turns off shortly
before the end of the cooking process.
The residual heat in the oven is
sufficient to complete the cooking
process.
Using the residual heat in the oven
saves energy.
Energy Save Phase will appear in the
display to show that the oven is in
energy save mode. The measured core
temperature is no longer visible.
The cooling fan and convection fan (if
turned on) will continue to run.
When the selected core temperature
has been reached:
– Program Finished appears.
– The buzzer will sound if it has been
turned on (see “Settings – Volume –
Buzzer tones”).
Tip: If the food is not sufficiently
cooked, insert the roast probe in a
different place and repeat the program.
Loading ...
Loading ...
Loading ...