Loading ...
Loading ...
Loading ...
IMPORTANT SAFETY INSTRUCTIONS
10
Before installing the oven, check for externally visible damage. Do
not operate a damaged appliance.
Reliable and safe operation of the oven can only be guaranteed if
it is connected to the power supply.
Operating a damaged appliance can result in microwave leakage
and present a hazard to the user. Do not use the appliance if:
– the door is warped or bent,
– the door hinges are loose,
– holes or cracks are visible in the housing, the door, the door seal
or the oven interior walls.
To guarantee the electrical safety of this appliance, continuity
must exist between the appliance and an effective grounding
system. This appliance must be grounded. Connect only to properly
grounded outlet. See “Electrical connection - GROUNDING
INSTRUCTIONS”. It is imperative that this basic safety requirement
be met. If there is any doubt, have the electrical system of the house
checked by a qualified electrician.
Proper installation: Make sure that your appliance has been
installed correctly and that it has been grounded by a qualified
technician.
Before installation, make sure that the voltage and frequency
listed on the data plate correspond with the household electrical
supply. This data must correspond to prevent injury and machine
damage. Consult a qualified electrician if in doubt.
Before installation or service, disconnect the power supply to the
work area by
– removing the fuse,
– “tripping” the circuit breaker, or
– unplugging the unit. Pull the plug not the cord.
Loading ...
Loading ...
Loading ...