Loading ...
Loading ...
Loading ...
11 12
System Setup/Bluetooth Operation/USB Copy:
Bluetooth Operation/USB Copy/Common Operation:
V. Speaker Setup:
The setup operations are as follows:
Downmix:
Enter the【Downmix】 option and press【►】 key
to enter the sub-menu; there are three modes to
choose from: LT/RT, STEREO or VSS.
Front:
Enter the【Front】 option and press【►】 key
to enter the sub-menu; there are two modes
to choose from: LARGE or SMALL.
Bluetooth Reception:
To connect an external device to this unit via
Bluetooth:
USB Copy:
To Copy an MP3 File:
When playing an MP3 disc, press 【Copy】 key on
the remote and enter the copy selection interface;
the content that can be copied are the tracks of the
current disc being played.
To Copy an MP4 File:
When playing an MPEG4 disc, press the 【Stop】
key to return to the menu interface, press the
【Copy】 key on the remote and enter the copy
selection interface; the content that can be copied
are the tracks of the current disc being played.
To Copy a CD File:
When playing a CD disc, press 【Copy】 key on the
remote and enter the copy operation interface.
1. Press "Function" button on the remote control or
button on the panel to select the Bluetooth
function. The corresponding screen will then
display "BT" indicating that the Bluetooth function
is on.
2. Ensure the Bluetooth function is on on the
external device and search for MX-DN230A.
Once found, click on it and pair. Once connected,
you will hear a signal indicating that the connection
is successful.
Please note: Bluetooth is only controlled by an
external device.
1. Move the highlight bar to the “SPEED” option,
press the 【ENTER】 key then select the desired
multiple (i.e. copy speed).
2. In the copying process, select “CHANGE SPEED”
option or press 【ENTER】 key to switch the copy
speed.
Bit Rate Setup:
BITRATE Move the highlight bar to the “ ” option and
press to set up; for the le with high bit 【ENTER】
rate, the capacity will be enlarged and the quality of
le will be closer to that of original le. The system
default is: 128 . KBPS
Create ID3 Information:
Move the highlight bar to “CREATE ID3 TAG” option
then press 【ENTER】 key to select or cancel. By
selecting this option during the copying process,
the le will be created with ID3 information which is
produced automatically by the system.
Create File List:
Move the highlight bar to “CREATE FILE LIST"
option then press 【ENTER】 key to select or
cancel. By selecting this option during the copying
process, a le list will be produced automatically.
Create Playlist:
Move the highlight bar to “TRACK” option, press
rig h t k e y t o s e l e c t tr a c k o p t i o n t h e n pre s s
【ENTER】key to select the song to be copied or to
be cancelled.
Copy:
Move the highlight bar to “START” option; at this
time, the information about this copy will be shown
on the right hand side (TOTAL TRACKS, TOTAL
TIME and TOTAL SIZE). Then press 【ENTER】
key to start copying and the system will write the
CD in MP3 format onto the designated USB. When
copying at normal speed, you can listen to the
content that is being copied at the same time; when
selecting 4 times speed, it will be mute. Please
note: When you press the 【ENTER】 key to switch
spe eds , th ere wil l be a sli ght so und whi ch
continues for a few seconds.
Cancel Copy:
During copy, you can move the highlight bar to
“CANCEL” option and press 【ENTER】 key to
conrm.
Return from Copying Screen:
Move the highlight bar to “RETURN” option and
press 【ENTER】key to conrm return.
Ple a s e n o t e : D u r i n g co p y, e n s u r e t h a t t he
available space on the USB is enough for the size
of the le(s) to be copied and insert USB into the
USB interface. If
SHARPNESS
Sharpness
Enter the【Sharpness】option, press 【►】key to
enter the sub-menu then use the direction keys
“ U p ” o r “ D o w n ” t o a d j u s t t h e S h a r p n e s s
parameters.
you have two tracks with the same title, rename
one of the tracks, otherwise one track will be
saved over the other. While copying, do not pull
the USB out or shut the unit down, as this could
damage the unit or USB. If the USB cannot be
read after it has been copied, please format the
USB on your computer.Before formatting, please
save the important data from the USB.
SHARPNESS
Saturation
Enter the【Saturation】option, press【►】key to
enter the sub-menu then use the direction keys
“ U p ” o r “ D o w n ” t o a d j u s t t h e S a t u r a t i o n
parameters.
Multiple Setup:
Disc Playing Operation:
Sequence:
1. After reading the disc, the unit will automatically go into
sequence play mode.
2. Press 【PLAY/PAUSE】key in pause mode and play mode
will be recovered.
Menu:
Press 【MENU】 when using discs with VCD 2.0, or DVD
format. Different formats of discs have different menus.
Title:
When playing a DVD, you can choose this play mode.
Record:
When playing VCD, CD and MP4, you can press “RECORD”
key to transfer audio file(s) in MP3 format to the USB.
Select:
You can press the number keys on the remote to directly select
the required track that you want to play. When VCD is in MENU
mode, the track cannot be selected and can only be selected
when the MENU mode is off. Different formats of discs have
different selecting approaches(for example press number key
“5” to select the 5 track. When selecting “23”, press “10+”
th
twice and the screen will show “20+”; then press number key
“3” or try to press “2” then hold “3” and the unit will
select 23).
Loading ...
Loading ...
Loading ...