Loading ...
Loading ...
Loading ...
18
17
Common Operation/Radio Station/ Audio Input Operation:
At this time, the unit will display “LINE”.
Radio Station Selection and Storing:
After operating the "Auto Search", the unit will
automatically store the radio station/s found in
sequence. After operating “manual search” or
“frequency-selecting search”, the unit will
automatically store current radio frequency into
current station.
External Audio Input Setting:
Press 【FUNCTION】 key or 【AUX】 key on
the remote or panel to switch the unit into audio
input state.
En su re the “A UX ” o r “Aud io In pu t ” c ha nn e l
interface of the unit is connected to AF generator
input of any machine.
Radio Program Selection:
Press【 】 and 【 】 keys on the remote
or【 / PREVIOUS 】 and【 /NEXT】keys on
the panel to select a stored radio program.
FM Operation:
FM Radio:
Press 【FUNCTION】 or 【FM】 key on the
panel or remote to switch the unit to FM operation
mode.
Manual Search:
Press 【Fast Backward】or【Fast Forward】 keys
on the panel or remote to manually tune and
search. You can search the desired radio station
backwards or forwards.
Auto Search:
Press 【SEARCH】keys on the panel or press and
hold 【SEARCH】 key on the remote control then
the unit will automatically search in full band. FM
frequency ra ng e: 87 -1 08 MH Z( 50 KH Z f or each
step).
Please note: After you have found your specic
station, the uni t will automatically store it into
current program. The FM search is affected by the
radio signal strength. If no program is found during
auto search or an offset frequency occurs, please
use manual search, frequency-selecting search or
adjust frequency by adjusting the antenna position.
Frequency-Selecting Search:
Press 【GOTO】 key on , the unit will the remote
display frequency-selecting state then use number
keys to input your desired radio frequency. FM
frequency range: 87-108 MHZ.
Troubleshooting
Before repairing, please take a look at the following problems and possible solutions rst.
Problem Reason Measure
No power.
No image.
No sound.
Bad image quality.
DVD player is not
activated.
Mp3 no sound
or with noise.
No disc or USB inserted.
Bad video connection or not
connected well.
Connected TV doesn't work.
Not set to current connecting
channel.
Bad audio connection or not
connected well.
Connected unit doesn't work
or volume is muted.
Disc is dirty.
Bad image quality of disc.
No disc inserted.
Disc installed upside down.
Disc installed incorrectly into it's slot.
Disc is dirty.
TV displays setting screen.
Remote is not aimed at the
receiving window.
The remote and DVD player are too
far away from each other.
There is a large obstacle between
the remote and the receiving window.
Remote has low batteries.
Unsupported le format.
No le in USB, format is incorrect.
USB damaged.
Locking level is activated.
Connect plug properly.
Insert disc or USB.
Set TV to current output platform.
Replace TV connection or connect
correctly.
Ensure TV works properly.
Set to current connecting channel.
Replace audio connection or
connect correctly.
Ensure connected unit works
properly or turn volume up.
Clean disc.
Replace disc with good image quality.
Insert disc.
Place the silk-screen side upwards.
Place disc into it's slot correctly.
Clean disc.
Quit setting state.
Unlock or change locking level.
Aim remote at the receiving window.
Please operate within effective
range of 7m.
Please move obstacle.
Please replace with new batteries.
Skip the le.
Repair or replace USB.
Remote
malfunction.
USB le(s)
unavailable.
The unit doesn't work
after the power has
been switched on.
TV isn't set to DVD output.
Plug is not properly connected.
Please store supportable le formats
or format the USB, then re-copy
the les.
Fault Guide:
Source Switching:
1.While the disc is playing, press [SOURCE] key on
remote control to switch to USB mode.
2. An interface will appear when switching from disc
to USB. Press direction keys to select the le then
press 【ENTER】key for conrmation.
3.System will automatically load the USB les when
there is no disc loaded.
E.g. If the frequency is less than 100Mhz, a zero should be
added before the first figure, such as 95Mhz should input 0950,
and 89.2 Hz should input 0892. The frequency input must have
4 figures.
Loading ...