Loading ...
Loading ...
Loading ...
Basic Receiving and Playing Operations
22 LED -LCD television Owner’s Manual
To achieve smooth playing, ensure the following:D
The file code rate should be lower than 300KB/S; •
Due to the limitation of USB signal transmission •
distance, it is recommended not to use USB patch
cord, in case of using the cord, make sure that its
length is not over 1m;
Use high-speed USB equipment in conformity •
with USB2.0 Interface Standard; if USB equipment
in conformity with USB1.1 Interface Standard is
used, the playing may be unsmooth.
Although many movie files are with such postfixes as
E
avi and mpeg, actually there are several formats in the
files; however, the TV can only play some files in avi
and mpeg formats. Some files with the postfix "dat"
are not movie files, but data files commonly used in
computers, and they can not be played as movies.
Start/Exit Streaming Media Playing
System
Press A USB on the remote control unit to select the
streaming media function.
Insert USB equipment into corresponding USB
B
interface 2s after starting the system.
After entering the system menu, press
C
/
on
the remote control unit to select the required USB
equipment, and then press
/
on the remote
control unit to select the required file.
Press
D OK to enter the selected file.
To exit the streaming media playing system and E
watch a TV program, you must return to the
streaming media main menu at first (to protect
equipment), and then press SOURCE to select TV or
directly press USB to return to the TV mode.
Operating Method of Streaming
Media Menu
Press A
/
to scroll through main menu or
submenu and select your desired option.
Press
B OK to confirm your selection.
Press
C REV/FWD to achieve the FF (fast forward) and
FB (fast back) of the movie or music being played.
Press
D PLAY/PAUSE to pause playing, and press it
again or press OK to continue playing.
Press
E ZOOM to magnify pictures; in zoom mode,
press
/
and
/
to move the picture.
Press F OK to display and press EXIT to exit the screen
display information while playing.
Press
G BACK to stop playing, or return to the previous
menu, and press BACK repeatedly to return to the
main menu.
Playing a Picture
After entering USB main interface, press A
/
to
select a harddisk partition, and then press
/
to
select the Picture option.
Press B OK to confirm the selection and enter the
picture playing interface.
Press
C
/
to change page, and press
/
to
select the picture you want to play, and then press
OK to enter the playing display interface.
Press • ZOOM to magnify the picture, and then
press
/
/
/
T to move the picture.
Press •
/
to select the last or next picture.
Press •
/
to rotate the picture.
Loading ...
Loading ...
Loading ...