Loading ...
Loading ...
Loading ...
Basic Receiving and Playing Operations
LED -LCD television Owner’s Manual 17
Manual Search
Press
/
to select the Search
option, and finally
press
/
to start manual search. Upon finding a
program, the search will automatically stop, and the
program will be stored onto the current channel.
You may stop the search by pressing OK or MENU
.
Fine Tune
Press
/
to select the Fine Tune option, and
then press
/
to start UP or DOWN fine tuning
until obtaining a relatively good picture effect. The
fine tuning function is for the purpose of improving
picture effect through fine tuning when that of a
certain program is not good enough. Normally, the
optimal picture effect can be obtained without fine
tuning when watching TV programs, and fine tuning
is to meet the need of adjusting a certain program.
Color system
Press
/
to select the Color Systems option,
and then press
/
to select correct color
system.
The TV is designed with three systems for your
choice, i.e. Auto, PAL , SECAM and NTSC. Generally,
the system is set as Auto and it is not necessary to
make an adjustment. The system is normally set as
Auto during auto search.
Sound system
The TV is designed with four systems for your
choice, i.e. DK, M, BG and I. Generally, it is not
necessary to adjust the system. The system is
normally set as DK during auto search.
Skip
When the skip is set ON, the channel will be
skipped when pressing CH or CH and only can
be selected by pressing 0-9 numerical keys.
If you want to recover the skipped channel
1. Use Direct-digit Choosing button to select the
number of the channel to be recovered.
2. Do the above steps again.
3. Press
/
to set Skip as Off.
Auto Tuning
Press A MENU button and then use
/
button to
select Channel menu.
Press
B
/
button to select Auto Tuning, then
press OK the menu opens.
PressC
/
button to select OK, press
OK
button on
the remote to start to scan. Press MENU button to
return to the previous menu, press EXIT button to
EXIT the menu screen.
All channels now available will be automatically preset in
order .After the search has nished, the rst program
number will display on the screen.
This search automatically adds only the active channels
in your area to the TV's memory.
It deletes any channels on which there is no broadcast or
a poor signal.
The channels found are automatically saved.
Exchange
Press A MENU on the remote control unit or MENU on
the TV’s front panel to display main menu, and then
press
/
to select Channel menu.
Press
B
/
to select the Prog. Exchange option,
and then press OK to enter its submenu.
Press C
/
to select the To Channel option, and
then press
/
to set the found to be exchanged to
.
Loading ...
Loading ...
Loading ...