Loading ...
Loading ...
Loading ...
24
www.simpson.com.au
To clean the water inlet filters:
1. Close the water tap.
2.
3.
4. Remove the inlet hose behind
the appliance.
5. Clean the filter in the valve with
a stiff brush or a towel.
6. Install again the inlet hose.
Make sure that the couplings are
tight to prevent leakages.
7. Open the water tap.
45°
If the machine is exposed to
temperatures below 0°C, certain
precautions should be taken.
8.9 The Dangers Of Freezing
Turn off the water tap.1.
2. Unscrew the inlet hose.
3. Remove the drain hose from
the rear support and unhook it
from sink or spigot.
4. Put the ends of the drain and
inlet hose in a container. Let
the water flow out of the hoses.
5. When no more water flows,
install the inlet hose and the
drain hose again.
Disconnect the mains plug from
the mains socket.
For an emergency drain follow the
same procedure.
Make sure that the temperature
is more than 0 °C before you
use the appliance again.
The manufacturer is not
responsible for damages
caused by low temperatures.
Remove the water inlet hose
from the water tap.
Clean the filter in the inlet hose
with a stiff brush.
Loading ...
Loading ...
Loading ...