Loading ...
Loading ...
Loading ...
12
www.simpson.com.au
BEFORE FIRST USE4.
DAILY USE5.
Ensure that the electrical and water
connections comply with the
installation instructions.
Put 2 litres of water in the detergent
compartment for washing phase.
This activates the drain system.
1.
2.
3.
Select “Whites” cycle at 90 °C, without
any laundry in the machine, to remove
any manufacturing residue from the
drum and tub then start the machine.
Step 1 - Loading The Laundry
5.1 Four Steps Start Up Guide
Connect the mains plug to the mains
socket.
Turn the water tap on.
1.
Open the door by carefully
pulling the door handle outwards.
Check and remove objects (if
there are any) that could be
trapped in the fold.
2.
Wash bras, pantyhose and
other delicates in a mesh
laundry bag, which you can
purchase from your
supermarket.
Remove hooks or tie them up
in a bag or net.
Make sure that you wash lint
collectors separately from lint
producers.
IMPORTANT!
Button up pillowcases, close zip
fasteners, hooks and poppers.
Tie any belts or long tapes.
Make sure that no metal
objects are left in the
laundry (e.g. hair clips,
safety pins, pins).
Loading ...
Loading ...
Loading ...