Loading ...
Loading ...
Loading ...
17
The appliance stops automati-
cally.
The acoustic signal will operate.
The display will show “ ”.
The indicator of the “Start/Pause”
touchpad goes off.
The door lock indicator “ ”
goes off.
Remove the laundry from the
appliance. Make sure that the
drum is empty.
Keep the door and the detergent
drawer ajar, to prevent the
mildew and odours.
Turn off the water tap.
5.7 At The End Of The Program
AUTO Stand-By Option
5.8
The AUTO Stand-by option
automatically deactivates the
appliance to decrease the energy
consumption when:
You do not press any touch-
pads for 5 minutes before you
press “Start/Pause”.
Press the “On/Off” button
to activate the appliance
again.
After 5 minutes from the end of
the washing program.
Press the “On/Off” button
to activate the appliance
again.
When the program is completed
and the door lock indicator “ ”
goes off, you can open the door.
Alternatively, before pressing
the “Start/Pause” touchpad, you
can press the “Spin ” touchpad
to change the spin speed. You
can select “No Spin”, if you want
the machine to only drain the
water.
2.
Press the “On/Off” button to
deactivate the appliance.
3.
After approximately 18 hours if
you do not press Start/Pause
touchpad, the appliance will
drain and spin automatically
(except for Wool/Handwash
program) .
At the end of the program the
time remaining can suddenly
decrease from 7 minutes or less
to 0 due to the overestimated
total program time during the
load sensing phase. In some
cases (with perfectly balanced
load) the program time can be
shorter than the time estimated
after the load sensing phase is
completed. This is a normal
behavior of the machine and not
a cause for concern as it does
not compromise its performance.
Loading ...
Loading ...
Loading ...