Loading ...
Loading ...
Loading ...
22
www.simpson.com.au
CARE AND CLEANING8.
You must DISCONNECT the
appliance from the electricity
supply, before you can carry out
any cleaning or maintenance
work.
The water we use normally
contains lime. It is a good idea to
periodically use a water softening
powder in the machine.
Clean the appliance only with soap
and warm water. Fully dry all the
surfaces.
Do not use alcohol, solvents or
chemical products.
Do this separately from any laundry
washing, and according to the
softening powder manufacturer's
instructions.
This will help to prevent the
formation of lime deposits.
8.2 Descaling
8.1 External Cleaning
The washing powder and additive
dispenser drawer should be
cleaned regularly.
To aid cleaning, the top part of the
additive compartment should be
removed.
Remove the drawer by pushing the
catch and pulling it out. Flush it out
under a tap, to remove any traces
of accumulated powder.
8.5 Cleaning The Dispenser
Drawer
Leave the door open for a while.
This helps to prevent mould and
stagnant smells forming inside the
appliance. Keeping the door open
after a wash will also help to
preserve the door seal.
8.3 After Each Wash
With the use of low temperature
washes it is possible to get a build
up of residues inside the drum.
Maintenance Wash With
“Tub Clean” program
We recommend to use “Tub Clean”
program to clean the drum regularly
to remove any residue.
8.4
The drum should be empty of
laundry.
Press Start/Pause to start the
program.
Select the “Tub Clean” program.
To run a maintenance wash:
WARNING!
CAUTION!
Loading ...
Loading ...
Loading ...