Loading ...
Loading ...
Loading ...
Instructions for the Installer
EN
44
16 BEFORE INSTALLATION
Check that the input voltage indicated on the rating
plate is the same as the voltage of the power outlet you
are going to use. The rating plate is located on the front
part of the cavity and it is only visible after opening the
door.
If required by the National Electrical Code (or Canadian
Electrical Code), this appliance must be installed on a
separate branch circuit.
Installer – show the owner the location of the circuit
breaker or fuse. Mark it for easy reference.
Before installing, turn power OFF at the service panel.
Lock service panel to prevent power from being turned
ON accidentally.
Be sure your appliance is properly installed and
grounded by a qualified technician. Installation,
electrical connections and grounding must comply with
all applicable codes.
Open the oven door and take out all the accessories
and remove the packing material.
Do not remove the mica cover on the ceiling of the
interior! This cover stops fat and pieces of food
damaging the microwave generator.
Warning! The front surface of the oven may be
wrapped with a protective film. Before using the oven
for the first time, carefully remove this film, starting on
the inside.
Make sure that the oven is not damaged in any way.
Check that the oven door closes correctly and that the
interior of the door and the front of the oven opening are
not damaged. If you find any damage contact the
Technical Assistance Service.
DO NOT USE THE OVEN if the metal conduit is
damaged, if the oven does not function correctly or if it
Loading ...
Loading ...
Loading ...