Loading ...
Loading ...
Loading ...
Cruise Control Set
Vehicle Speed Display
The vehicle speed preset using the
cruise control is displayed.
MAINTENANCE
MONITOR — IF
EQUIPPED
Oil Life Reset
Vehicles With Fiat Radio 3.0
“Oil Change” with flexible settings are
available. Consult an authorized dealer
for details.
Note: The engine oil flexible
maintenance setting is available (if
equipped). Based on the engine
operating conditions, the on-board
computer in your vehicle calculates the
remaining oil life. When the engine oil
flexible maintenance setting is selected,
the system must be reset whenever
replacing the engine oil.
When the engine oil flexible
maintenance setting is selected, the
Indicator light will illuminate in the
instrument cluster when remaining oil
life becomes less than 300 miles
(500 km) or remaining days are less
than 15 (whichever comes first).
Reset Method
Your vehicle is equipped with an engine
oil change indicator system. The “Oil
Change Required” message will flash in
the instrument cluster display for
approximately ten seconds after a single
chime has sounded to indicate the next
scheduled oil change interval. The engine
oil change indicator system is duty cycle
based, which means the engine oil
change interval may fluctuate, dependent
upon your personal driving style.
Unless reset, this message will continue
to display each time you turn the
ignition switch to the ON/RUN position.
To reset the oil change indicator system
(after performing the scheduled
maintenance), refer to the following
procedure
1. Place the ignition in the ON position.
(Do not start the engine.)
2. Fully push the accelerator pedal
slowly to the floor, three times within ten
seconds.
3. Place the ignition in the OFF/LOCK
position.
Note: If the indicator message
illuminates when you start the vehicle,
the oil change indicator system did not
reset. If necessary, repeat this
procedure.
Oil Life Reset
Vehicles With FIAT Connect
7.0 Radio
Proceed as follows:
1. Select the icon
on the home
screen to display the “Applications”
screen.
2. Select “Maintenance” to display the
maintenance list screen.
3. Switch the tab and select the setting
item you want to change: “Scheduled,”
“Tire Rotation,” or “Oil Change.”
0502010819A019
Cruise Control Display Screen
82
GETTING TO KNOW YOUR INSTRUMENT PANEL
Loading ...
Loading ...
Loading ...