Loading ...
Loading ...
Loading ...
VIZIO P50 HDM User Guide
Version - 5/24/2005 38
www.vizioce.com
Power is ON but no screen image.
Confirm the video cables are properly connected. See section 2.2-
2.6.
Adjust brightness and contrast.
Check Source settings.
Wrong or abnormal colors appear.
If any colors (red, green, or blue) are missing, check the video cable
to make sure it is securely connected. Loose or broken pins in the
cable connector could cause an improper connection.
Connect the plasma display to another source.
Control buttons do not work. Press only one button at a time.
Remote Control does not work.
Make sure batteries are inserted correctly
Batteries could be weak.
There appears to be image quality
issues.
Viewing television broadcasts: For best image quality, “Standard
Definition” TV should be viewed as 4:3.
COMPONENT 480i: For best image quality the “YCbCr” Input
should be used.
You cannot see a picture. Make sure that the power cord is plugged into a grounded electrical
outlet.
Make sure that the power button is turned on.
Make sure that the selected input source is connected to a working
input source.
If your plasma monitor is connected to your computer in RGB or
HDMI™ mode, press any key on your keyboard to “wake” your
computer.
You see a distorted picture or hear
unusual sound.
You may be getting interference from electrical appliances, cars,
motorcycles, or fluorescent lights. Try moving your plasma monitor
to another location.
The picture has abnormal patterns. Make sure that the input source cable is attached securely and
correctly to the back of your plasma monitor.
Make sure that the video input source is within the range of your
plasma monitor. Compare the video input source’s specifications
with your plasma monitor specifications.
The display image does not cover
the entire screen.
If you are using RGB mode, make sure that H Size and V Position in
the OSD are set correctly.
If you are using AV1, AV2, or component (Analog HD) with 480i
input, use the WIDE button on the remote control to scroll through
various screen modes.
You can see a picture but you
cannot hear sound.
Make sure that the volume is not turned down.
Make sure that the sound is not muted; speakers are turned off in
the audio settings.
Make sure that your audio input source cables are connected
securely and correctly.
You see “noise” or “trash” on the
screen.
When your plasma monitor’s digital capabilities exceed an analog
broadcast signal, the signal is up-converted (increased) to match
your plasma monitor’s display capabilities. Up-converting can cause
noise or trash.
You switch to a different input and
the volume changes.
The plasma monitor remembers the volume level from the last time
you used a particular input (AV1, AV2, Analog HD, and Digital HD).
You switch to a different input and
the screen size changes.
The plasma monitor remembers the viewing mode from the last time
you used a particular input (AV1, AV2, Analog HD, and Digital HD).
Loading ...
Loading ...
Loading ...