Loading ...
Loading ...
Loading ...
VIZIO P50 HDM User Guide
Version - 5/24/2005 23
www.vizioce.com
Figure 3.4a
Figure 3.4b
3.4 - Preparing the Plasma for Wall Mounting
The VIZIO P50 HDM can either be kept on the base stand or mounted to the wall for viewing. If
you choose to mount the P50 HDM to the wall, please follow the instructions below for removing
the base stand.
To remove the stand base:
1. Unplug all the cables and cords from the plasma
monitor.
2. Place the plasma monitor face down on a soft and
flat surface (blanket, foam, cloth, etc) to prevent
any damage to the display.
3. Remove the 6 screws on each side of the back
panel of the plasma monitor located near the
bottom so that the base stand can be removed
(see Figure 3.4a).
4. Gently pull the stand away from the display by
grasping firmly to the base.
5. Now, the display can fit securely to a mount (sold
separately) by utilizing the mounting holes in the
center of the back panel of the display (see Figure
3.4b). Please make sure to read the directions of
your specific wall mount to properly hang the P50
HDM.
To find the perfect mount for the VIZIO P50 HDM, browse VIZIO’s certified mount selection at
www.vizioce.com
or call directly, 1.888.VIZIOCE (1.888.849.4623).
Loading ...
Loading ...
Loading ...