Loading ...
Loading ...
Loading ...
NFC
Use NFC to send data: Open Settings, touch Device connection and enable NFC and Huawei
Beam. Select the les you want to send and touch Share > Huawei Beam to enable NFC. Keep your
Phone unlock and light on. Place the NFC detection areas of both devices close together. Once a
connection is established, the sending device will play an audio prompt and the sharing screen will
minimize. Touch the sending device's screen to begin sending les.
Accepting les over NFC: Open Settings, touch Device connection and enable NFC and
Huawei Beam. Keep your Phone unlock and light on. Place the NFC detection areas of both devices
together. Once a connection is established, the sending device will play an audio prompt. Wait for the
le transfer to complete. Received les are saved to the beam folder in Files by default.
If there is a
Read and write/P2P switch on the NFC screen, ensure it is also enabled.Features
may vary depending on your carrier.
Use NFC to Connect Devices Quickly
Place the NFC detection areas of two devices close together to quickly establish a Bluetooth or Wi-Fi
connection between them. You can also use this method to establish a Wi-Fi Direct connection or
share a Wi-Fi hotspot without entering connection details manually.
Device Connection
89
Loading ...
Loading ...
Loading ...