Loading ...
Loading ...
Loading ...
66 / English
Front-Loading Automatic Washer
Troubleshooting
Problem Reason Solution
Programme
time does not
countdown. (On
models with
display) (*)
Timer may stop during water
intake.
* Timer indicator will not
countdown until the product
takes in an adequate amount
of water. The product will
wait until there is a sufficient
amount of water to avoid
poor washing results due to
lack of water. Timer indicator
will resume countdown after
this.
Timer may stop during the
heating step.
* Timer indicator will not
countdown until the product
reaches the selected
temperature.
Timer may stop during
spinning step.
* The automatic unbalanced
load detection system might
be activated due to the
unbalanced distribution of
laundry in the product.
Product does
not switch to
spinning step. (*)
There might be an unbalanced
load in the product.
* The automatic unbalanced
load detection system might
be activated due to the
unbalanced distribution of
laundry in the product.
The product will not spin
if water is not drained
completely.
* Check the filter and the
draining hose.
Excessive foam might have
occurred and automatic foam
absorption system might have
been activated due to too
much detergent.
* Use recommended amount
of detergent.
“No spin” setting may be
adjusted.
* See “Spin Speed Selection”.
Drain pump filter or drain itself
may be clogged.
* Clean the drain pump filter
(See “User maintenance
instructions” ). If the house
drain pipes are clogged, call
a plumber for assistance.
Loading ...
Loading ...
Loading ...