Loading ...
Loading ...
Loading ...
58 / English
Front-Loading Automatic Washer
User maintenance instructions
Cleaning the outer cabinet and control panel
When necessary:
• Wipe the exterior panels of your washer with soapy water or mild
detergent. Dry it with a soft cloth.
• Use only a soft and damp cloth to clean the control panel.
C
CAUTION
• Never use a sponge or scrubbing material. These will damage the
painted and plastic parts.
Cleaning the water inlet strainers
There is a strainer at the end of each water inlet valve at the back
side of the washer and also at the end of each water inlet hose where
they are connected to the faucets. These strainers prevent the foreign
substances and dirt in the water to enter into the washer. Strainers
should be cleaned from time to time.
• Close the water faucets.
• Remove the nuts of the water inlet hoses to clean the
surfaces of the strainers on the water inlet valves with
an appropriate brush.
• If the strainers are very dirty, you can pull them out by
means of pliers and clean them.
• Take out the strainers on the flat ends of the water
inlet hoses together with the rubber seals and clean
thoroughly under running water.
• Replace the rubber seals and strainers carefully and tighten the
hose nuts by hand.
Loading ...
Loading ...
Loading ...