Loading ...
Loading ...
Loading ...
Settings
83
Display switch-off
To save energy the display and sensor
buttons will go out after 10 minutes
and the Start/Stop button will flash
slowly. You can alter this setting.
Options
– On (default setting)
The display will go out (after 10
minutes):
– if a program is not selected after
the dryer has been switched on,
– during the current program,
– at the end of a program.
– On (not in current program)
The display will go out (as described
above) but will remain on while the
program is running.
– Off
The display will remain on (i.e., it will
never go out).
You can switch the display back on by
touching any sensor button.
Memory
The dryer saves the settings that were
selected last for a drying program
(drying stage and/or extra option, or
the duration for some programs).
When the program is chosen again, the
saved settings will appear in the
display.
Options
– Off (default setting)
– On
The activation of the delay start, the
buzzer, or the ECO feedback data are
not saved.
Anti-Crease
After the drying cycle has finished, the
drum will continue to rotate in a
special Anti-crease rhythm. This helps
to prevent creasing if the laundry is
not removed immediately after the end
of a program.
Options
– 1h
– 2h (default setting)
Program info
The program names and maximum
load, which are lit in the display when
the program is selected with the
program selector, can be switched off.
Options
– Off (program name and load are not
displayed)
– Program name (the load is not
displayed)
– Program name and max. load (both
are displayed, default setting)
Loading ...
Loading ...
Loading ...