Loading ...
Loading ...
Loading ...
Changing the program sequence
39
You cannot change to another program
once a program has started (this
prevents unintentional alterations).
If you try to change a program,
Change not possible lights up until the
original program is reset.
Exception: The dryer is switched off by
turning the program selector to the
position.
You will need to cancel the current
program before you can select a new
one.
Canceling a program
Touch the Start/Stop sensor button.
Cancel Program lights up.
Confirm with the OK sensor button.
End/Cooling down will light up in the
display, depending on the drying
duration and the drying temperature
reached.
If Program Canceled appears:
Turn the program selector to .
If you would like to select
another program
You can also directly cancel a running
drying program if you immediately
select another program and start it.
Turn the program selector to .
Turn the program selector to another
program.
Touch the Start/Stop sensor button.
Adding or removing laundry
Bear in mind that hot steam can
escape after the door is opened.
Pull open the door.
Add or remove items.
Close the door.
Touch the Start/Stop sensor button.
The program starts.
Program duration
Altering the program sequence can
cause the program duration shown in
the display to be adjusted.
Loading ...
Loading ...
Loading ...