Loading ...
Loading ...
Loading ...
4. Selecting program settings
30
If desired, change the specified time
and confirm with the OK sensor
button.
Canceling delay start
The selected delay start time can be
canceled before the program start.
Touch the sensor button.
The selected delay start time will
appear in the display.
Set a time value of 00:00 h with the
sensor buttons. Confirm with the
OK sensor button.
The selected delay start time has been
canceled.
After the program start, the selected
delay start time can only be changed
or deleted by interrupting the program.
SmartStart
The SmartStart function lets you
define a time period during which your
dryer will start automatically. The start
takes place via a signal, e.g., from
your energy supplier, that indicates
that the electricity rate is particularly
economical. Please check with your
local utility provider for availability.
This function is active when the
SmartGrid setting is switched on.
The time period can be defined
between 15 minutes and 24 hours.
During this period, the dryer waits for
the signal from the energy supplier. If no
signal is sent during the defined period,
the dryer starts the drying program.
Setting the timeframe
If you have activated the SmartGrid
function in Settings, SmartStart in
instead of Start in will appear in the
display when you press the sensor
button (see "Settings – SmartGrid").
The procedure for setting this is the
same as for setting the time for delay
start.
Use the sensor buttons to enter
the hour and confirm your entry with
the OK sensor button.
The hour will be saved and the minute
number pad will be highlighted.
Use the sensor buttons to enter
the minutes and confirm your entry
with the OK sensor button.
Press the Start/Stop sensor button to
start the drying program with
SmartStart.
The following will appear in the display:
OK
SmartStart
Loading ...
Loading ...
Loading ...